800-150 Pass Rate & 800-150 Question Explanations

Blog Article

Tags: 800-150 Pass Rate, 800-150 Question Explanations, Interactive 800-150 EBook, Related 800-150 Certifications, Hottest 800-150 Certification

Our company is a professional exam dumps material providers, with occupying in this field for years, and we are quite familiar with compiling the 800-150 exam materialls. If you choose us, we will give you free update for one year after purchasing. Besides, the quality of 800-150 Exam Dumps is high, they contain both questions and answers, and you can practice first before seeing the answers. Choosing us means you choose to pass the exam successfully.

Cisco 800-150 Exam Syllabus Topics:

Topic	Details
Topic 1	Networking Foundations: This section of the exam measures the skills of a Network Engineer and covers the basic building blocks of computer networking. It explains different types of networks like local area networks and wireless networks, and introduces lightweight wireless LANs. It describes the layers of communication models like the OSI model and TCP IP stack, and explains how data moves across networks. It also discusses the physical cabling used in networks, such as Ethernet and fiber optics. Students will learn about network switching, IP addressing, subnetting, and routing at Layer 3. The section also introduces Cisco’s campus network devices, data center switches, UCS servers, and collaboration devices, describing their roles and functions in the network.
Topic 2	Common Service Tasks and Tools: This section of the exam measures the skills of a Technical Support Engineer and focuses on tasks commonly needed to manage Cisco devices. It explains how devices boot up, introduces common Cisco IOS commands, and identifies tools for file management. It shows how to confirm physical connections, remotely access devices, and connect to the console port. It also covers how to capture the status of a device, recover passwords, and replace devices by using proper tools. Students are also taught how to find serial numbers on Cisco equipment to assist with support and maintenance activities.
Topic 3	Cisco UCS and Data Center Architecture: This section of the exam measures the skills of a Data Center Engineer and introduces Cisco’s UCS and data center solutions. It explains the devices found in a data center, including switches, UCS servers, and director switches, and describes different server deployment models. Students will also learn about virtualization components like virtual machines, hypervisors, cloud computing concepts, and deployment models. The section covers how Cisco UCS devices fit into campus networks, edge locations, and data centers, and explains the key components and connections used in UCS architecture.

>> 800-150 Pass Rate <<

800-150 Question Explanations - Interactive 800-150 EBook

Why don’t you begin to act? The first step is to pass 800-150 exam. Time will wait for no one. Only if you pass the exam can you get a better promotion. And if you want to pass it more efficiently, we must be the best partner for you. Because we are professional 800-150 Questions torrent provider, we are worth trusting; because we make great efforts, we do better. Here are some reasons to choose us.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q81-Q86):

NEW QUESTION # 81
Why is it important to verify the update status after the initial upgrade process when upgrading firmware on a Cisco UCS C-Series server using the Host UpgradeUtility?

A. To confirm that all intended components were successfully updated
B. To activate the new licenses associated with the firmware
C. To ensure compatibility with third-party applications
D. To generate a report for compliance documentation

Answer: A

Explanation:
After upgrading the firmware on aCisco UCS C-Series serverusing theHost Upgrade Utility (HUU), it is critical toverify the update statusto ensure thatall targeted components(such as BIOS, CIMC, and RAID controller firmware) have beensuccessfully updated.
Firmware upgrades often involve multiple subsystems, and partial or failed updates can result in inconsistencies or even device instability. Verifying the update status allows the technician to identify any missed components and perform corrective actions if necessary.
Options like generating compliance reports, third-party application checks, or license activations are not the primary reasons for this verification step in the HUU process.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

NEW QUESTION # 82
Drag and drop the tools from the left onto the corresponding primary functions on the right.

Answer:

Explanation:

Explanation:
In theFLDTEC curriculum, technicians are trained on physical tools essential for support in the field. These tools and their uses are explained as follows:
* Flash Card Reader:Used with removable CompactFlash cards commonly found in older Cisco routers and switches. These cards hold the IOS image or config files.
* USB Thumb Drive:Used for transferring IOS files or configs directly to and from Cisco devices that support USB storage. Convenient for portable backups.
* RJ-45 Ethernet Loopback Connector:A diagnostic tool that loops the signal back into the port. Helps verify port functionality by simulating a live Ethernet connection.
* RJ-45 Coupler:Allows two patch cables to be connected, effectively extending the reach of a cable - useful in setups where a single cable is not long enough.

NEW QUESTION # 83

Refer to the exhibit. Which component is highlighted on the Cisco I/O module image?

A. fan module LED
B. captive screw
C. chassis connections LED
D. fixed port

Answer: C

Explanation:
The highlighted component on the Cisco I/O module is the chassisconnections LED, which indicates the status of connectivity between the I/O module and the chassis.
In the exhibit, the orange arrow points to asmall rectangular LED indicatorlocated to the left side of the I/O module (Cisco UCS-IOM-2304). This specific LED isnot aligned with the ports, fans, or screws, which helps identify it correctly.
Chassis connections LED (B)is responsible for indicating thestatus of uplink/downlink communication between the I/O module and the chassis.
* Greenusually indicates a healthy link.
* Amberoroffmay indicate a problem or no connection.
Why the other answers are incorrect:
* A. Captive screw# These are at the far corners, not where the arrow points.
* C. Fan module LED# This IOM doesn't have user-visible fan LEDs atthe front face.
* D. Fixed port# These are the large rectangular SFP ports clearly visible in the middle, not near the arrow.
This identification is important whentroubleshooting chassis-to-IOM connectivityor verifyingmodule status LEDsduring field maintenance.

NEW QUESTION # 84

Refer to the exhibit. What are two ways remote sites or branchesconnect to the enterprise campus network?
(Choose two.)

A. WAN links
B. Access layer switches
C. Ad hoc Wi-Fi network
D. IPsec VPN tunnels
E. LAN core switches

Answer: A,D

Explanation:
In enterprise networking, remote sites or branch offices connect to the central campus network using:
* WAN Links:These are dedicated communication paths that connect geographically dispersed networks. WAN links can be leased lines, MPLS circuits, or other forms of long-distance connectivity that facilitate reliable data transmission between remote sites and the main campus.
* IPsec VPN Tunnels:Internet Protocol Security (IPsec) VPNs provide secure, encrypted tunnels over the public internet, allowing remote sites to connect to the enterprise network securely. This method is cost-effective and widely used for connecting branch offices to the central network infrastructure.
Access layer switches (Option A) and LAN core switches (Option E) are components within a local network and do not facilitate remote connectivity. Ad hoc Wi-Fi networks (Option D) are temporary and lack the security and reliability required for enterprise-level remote connections.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

NEW QUESTION # 85
Which command is used to specify the source for the Cisco IOS software image to load during the boot process?

A. boot image
B. boot source
C. boot ios
D. boot system

Answer: D

Explanation:
Theboot systemcommand is used in globalconfiguration mode to specify the source and filename of the Cisco IOS software image that should be loaded during the device's boot process. This command ensures that the device loads a specific IOS image, whether it's stored locally in flash or fetched from a TFTP server.
Syntax example:
boot system flash:c1900-universalk9-mz.SPA.157-3.M3.bin
* boot image,boot ios, andboot sourceare invalid or non-existent in standard Cisco IOS.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) -Cisco IOS Software Basics

NEW QUESTION # 86
......

Without a doubt, there is one thing that can assist them with perceiving this interest and clearing their Supporting Cisco Devices for Field Technicians (800-150) exam with flying colors. Cisco 800-150 dumps merge all that gigantic and the competitor doesn't require to purchase the aide or different books to review. They have this test material and need nothing else for planning Supporting Cisco Devices for Field Technicians exam.

800-150 Question Explanations: https://www.troytecdumps.com/800-150-troytec-exam-dumps.html

Report this page

800-150 PASS RATE & 800-150 QUESTION EXPLANATIONS

800-150 Pass Rate & 800-150 Question Explanations